Step 1 Part 1
Position the Truss
Lift the truss and move it into place. Set the hole in the foot on top of the bolt in the concrete footer. Put the nuts on. Tighten solid, but do not overtighten.Step 1 Part 1
Lift the truss and move it into place. Set the hole in the foot on top of the bolt in the concrete footer. Put the nuts on. Tighten solid, but do not overtighten.
Step 1 Part 2
Position the Truss 2
Lift the truss and move it into place on the footer bolts. Repeat moves from the last video.Step 1 Part 2
Lift the truss and move it into place on the footer bolts. Repeat moves from the last video.
Step 2
Prepare to the Truss
Get ready to lift the truss up to a vertical position.
Step 3
Lift the Truss
Lift the truss into a vertical position then screw it in place.
Step 4
The Crossbrace
Set the pieces for the crossbrace.
Step 5 Part 1
Prepare the Crossbrace
Loosen the turnbuckle. The hook will go on the top part of the crossbrace.
Step 5 Part 2
Crossbrace Cable
Setting the cable for the crossbraces.
Step 6
Square the Trusses
After installing the cables, plumb and square the two trusses. Use a purlin to help set square the trussesStep 6
After installing the cables, plumb and square the two trusses. Use a purlin to help set square the trusses
Building the Church in Africa.
